smartctl check on Adaptec RAID Controllers

smartctl check on Adaptec RAID Controllers

SATA Health Check Disk Syntax

# smartctl -d sat –all /dev/sgX
# smartctl -d sat –all /dev/sg1

Run test:

# smartctl -d sat –all /dev/sg1 -H

For SAS disk use the following syntax:

# smartctl -d scsi –all /dev/sgX
# smartctl -d scsi –all /dev/sg1
# smartctl -d scsi –all /dev/sg1 -H

Replace /dev/sg1 with your disk number. If you’ve raid 10 array with 4 disks than:

/dev/sg0 – RAID 10 controller (you will not get any info or /dev/sg0).
/dev/sg1 – First disk in RAID 10 array.
/dev/sg2 – Second disk in RAID 10 array.
/dev/sg3 – Third disk in RAID 10 array.
/dev/sg4 – Fourth disk in RAID 10 array.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s